AN-008 R5560/SE DAQs horizontal interconnection
This document explains how to use the FLAG signals and fast horizontal link between DAQ.Each DAQ is directly connected to the DAQ on the right and on the left with…
AN-007 Single Ended to fully differential Conversion
Most of the SciCompiler supported board require fully differential signaling to correct operate. Differential signaling is a method for electrically transmitting information using two complementary signals. The technique sends the…
AN-006 Maximize the available memory on R5560/SE to obtain 16Ksamples per waves on 32 channels
This code example for SciCompiler demostrate how to use the new Oscilloscope Dual component to digitize waveforms from 32 channel with a memory depth of 16Ksamples per channels at 14bits.…
AN-005 Using hardware Gate and Delay of the V2495 / DT5495 in SciCompiler project
This application note will demonstrate how to use the hardware Gate and Delay of the X2495 board to shape a digital signal introducing a programmable delay and width. The…
AN-004 Synchronize multiple R5560 / R5560SE to for simultaneous sampling on multiple device
This application notes explains how to synchronize multiple R5560/R5560SE to extend the number of input channels sampled simultaneously. This document covers the following task: How to distribute a common clock…
AN-003 Wave dump using digitizer component
The digitizer block in SciCompiler works as a programmable size FIFO to store waveform. It is possible to define, compiling time, the maximum number of channels, while at…
AN-002 Design a Fixed Threshold Discriminator with SciCompiler
This application note will show how to support a scientific application with an FPGA firmware, consisting of a signal discriminator with an arbitrary but fixed hardcoded threshold, designed and…
AN-001 Custom Packet data decode
SciCompiler allows to easy implement FIFO communication to transfer formatted data , like listo of energy, timecode, channels from FPGA to user computer in form of structured packet Custom packet…